KlipXtreme KMM-301 Manual De Instrucciones página 4

5. Proceed to slide the monitor into the edge of the upper mounting arm. Insert one M6x10
screw onto the top of the VESA monitor plate and the top edge of the mounting arm to
secure the monitor in place.
6. Using the 6mm allen wrench, tight the VESA monitor plate to the mounting arm as shown.
Q
7. Attach the two plastic covers to the laptop plate. Then, attach the two laptop plate holders
to the laptop plate.
E
D
M
C
8. Place the second VESA monitor plate onto the top of the laptop holder to lock them
together. Insert the four M4x8 screws to secure the assembly in place.
A
9. Using the other M6x10 screw, attach the VESA monitor plate and laptop plate to the lower
mounting arm.
10. Next, adjust the laptop plate holders in order to place the laptop on the plate. Make sure
the laptop plate holders are firmly attached to the laptop to avoid falls.
L