threat to human health and the environment. However, these
components are required for the correct operation of the ap-
pliance. Appliances marked by this symbol are not allowed to
be disposed of together with the household rubbish.
Notes on the content materials (REACH)
Current information on content materials can be found at:
www.kaercher.com/REACH
Accessories and spare parts
Only use original accessories and original spare parts. They
ensure that the appliance will run fault-free and safely.
Information on accessories and spare parts can be found at
www.kaercher.com.
Scope of delivery
The scope of delivery for the appliance is shown on the pack-
aging. Check the contents for completeness when unpacking.
If any accessories are missing or in the event of any shipping
damage, please notify your dealer.
Device description
Device description
For the illustrations, refer to the graphics page
Illustration A
Charger
1
Power switch
2
Charging socket
3
Charge indicator
4
Trigger switch
5
Type plate
6
Scraper disc
7
Protective cap
8
1. Charge the battery.
Illustration B
Note
The charge indicator flashes during the charging procedure.
It lights up continuously for 1 hour when the battery is fully
charged. For information on the charging time, see Chapter
Technical data.
English
Blink codes
LED lights up permanently:
The device is in operation.
LED lights up for 1 h: The de-
vice is connected to the pow-
er supply and the battery is
fully charged.
During operation: Low bat-
tery voltage warning.
The battery is discharged.
During charging: Battery is
being charged.
A fault has occurred (see Chap-
ter Troubleshooting guide).
Initial startup
Battery charging
19