Troubleshooting; Service Notes; Protecting The Environment - Stanley FATMAX FMC772B Manual De Instrucciones

***iPhone is a registered trademark of Apple Inc.
®

Troubleshooting

If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local Stanley Fat Max repair agent.
Warning! Before proceeding, unplug the appliance.
Problem Possible Solution
Cord not plugged in
Unit will not power on
Circuit fuse is blown
Circuit breaker is tripped
Cord or switch is
damaged
Battery is not charged
Battery is not fully
connected
Battery does not have
enough power
Battery has been removed
Adapter unplugged
without battery in place
Power to outlet is off when
using adapter
Device roamed out of
Bluetooth®
range
disconnected
Maintenance
Your Stanley Fat Max corded/cordless appliance/tool has been
designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends
upon proper tool/appliance care and regular cleaning.
Warning! Switch off and unplug the appliance before carrying
out any cleaning.
u
Possible Cause
Warning! NEVER use solvents or other harsh chemicals
for cleaning the non-metallic parts of the appliance. These
Plug the tool into a
working outlet
chemicals may weaken the materials used in these parts. Use
Replace circuit fuse (if
a cloth dampened only with water and mild soap. Never let
the product repeatedly
any liquid get inside the unit; never immerse any part of the
causes the circuit fuse
to blow, discontinue
unit into a liquid.
use immediately and
have it serviced at a
Warning! NEVER spray or in any other way apply lubricants
Stanley Fat Max
or cleaning solvents inside the tool. This can seriously affect
service centre or
authorised servicer)
the life and performance of the tool.
Reset circuit breaker (if
the product repeatedly

Service Notes

causes the circuit breaker
to trip, discontinue use
This product is not user serviceable. There are no user
immediately and have it
serviceable parts inside the radio. Servicing at an authorized
serviced at a Stanley Fat
Max service centre or
service center is required to avoid damage to static sensitive
authorised servicer)
internal components.
Have cord or switch
replaced at a Stanley Fat
Max service centre or

Protecting the environment

Z
authorised servicer
Charge battery
Push battery fully into the
battery port and ensure it
is properly connected
Should you find one day that your Stanley Fat Max product
needs replacement, or if it is of no further use to you, do not
Charge battery
dispose of it with household waste. Make this product avail-
able for separate collection.
Replace battery
z
Plug adapter into outlet or
properly insert battery
Ensure wall outlet is
receiving power or
properly insert battery
Bring device into range of
Bluetooth speaker
Device may need to be
paired to the Bluetooth Local regulations may provide for separate collection of elec-
again, see "Using
trical products from the household, at municipal waste sites or
Bluetooth Wireless
Technology"
by the retailer when you purchase a new product.
If two or more devices are
paired to speaker,
Stanley Fat Max provides a facility for the collection and
disconnect the speaker
in the settings of the one
recycling of Stanley Fat Max products once they have reached
of the devices.
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
(Original instructions)
Dirt and grease may be removed from the exterior of the
appliance using a cloth.
Separate collection. This product must not be
disposed of with normal household waste.
Separate collection of used products and packag-
ing allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
ENGLISH
5