MAC Audio MICRO XL 1000 El Manual Del Propietario página 9

Tabla de contenido

Idiomas disponibles

fig. 2 operation with stereo Car raDio

Connect and set the amplifier as shown in Fig. 2 if it is to be controlled by a car radio with two output channels.

(1) To the car radio, left output

(2) To the car radio, right output

(3) Subwoofer

fig. 3 operation with one Car raDio with suBwoofer output

(1) To the car radio, subwoofer output

(2) Subwoofer

fig. 4 use in master/slave moDe

4a one subwoofer connected to each amplifier

4b one subwofer in bridge mode between 2 amplifiers

(1) To the car radio, subwoofer output

Note: instead of a car radio with subwoofer output, a normal STEREO radio may be connected to the "INPUT" jacks (L and R).

(2) Subwoofer

fig. 5 operating elements anD in/outputs

(1)

Slave input

(2)

Master output

(3)

Low-level input

(4)

Input level control

(5)

Cross-over frequency control for the low pass

(6)

Cross-over frequency control for the subsonic filter

(7)

Bass booster control

(8)

Master/slave switch

(9)

Connection for volume remote control

Tabla de Contenido

Tabla de contenido