Tion IQ 400 Manual Del Usuario página 9

Informing
AirQuality
Air quality monitor
Real-time Air Quality monitoring mode
helps to assess air quality:
green = good, yellow = moderate,
red = bad
*with sufficient air quality, the purifier may go into
sleep mode (rate 0)
Controls
Turning on/off
On: press the Power button
Off: press the Power button
Speed control slider
To change the purifier's speed, move the
slider with your finger. Right to speed up,
left to slow down
Auto
Automatic mode
Press Auto for the purifier to function
on its own, depending on the air quality
in the room
Light
Light mode selection
Press Light several times
to select the mode:
Daytime: panel brightness 100%
backlight: off, sound: on
Evening: panel brightness 50%
backlight: off, sound: on
Night-light: panel brightness 0%
backlight: on, sound: off
Sleep: panel brightness 0%
backlight: off, sound: off
BioSafety feature
Decontamination efficiency monitor
Monitors air decontamination efficiency.
Green light: high decontamination efficiency.
No light: filter needs changed
Lock
Control panel locking
Push Lock and hold for at least
3 seconds, to block/unblock the purifier
controls
Pairing
Mobile device pairing monitor
Displays current pairing status
via the mobile app (p. 9).
To begin pairing, hold Power for 3+ seconds;
the light will start blinking. When paired
successfully: the light is on without blinking
Filter
Filter life. Counter reset
When the Filter light is not on, the filter has
sufficient useful life left. When the indicator is
red, replace the filter and reset the counter.
To do so, turn the device on. Press and hold
the Filter button for 3 seconds.
You will hear a beep and the counter will reset
to 180 days
You will hear a sound when the filter
life has been reset
EN
9