ECRON NY-25G1 Manual Del Usuario página 39

OPERATING YOUR OIL FILLED
RADIATOR
Place the heater on the floor at least 90 cm away from the
wall and any other objects such as furniture, curtains or
plants.
(Make sure the power supply used corresponds to the one
on the rating label)
With the thermostat control switch and the power setting
switches in the '0' position, plug the heater into the main
power supply.
1. Room temperature can be adjusted using the thermostat
simply. Turn the thermostat knob clockwise, to increase the
heat, and anti-clockwise to decrease the heat, until you reach
the desired temperature.
2. Switch the heater to one of the following power settings.
Model: NY-25G1 11FINS
a) Push switch one ( I ): 1000W
b) Push switch two ( II ): 1500W
c) Push switches one + two heat settings together: 2500W
3. The power switch lights up when activated.
EN
39