Premium PHM427 Manual De Instrucciones página 4

1. For the first use, cleaning the dough hooks and beaters. Before
assembling the mixer, be sure the power cord is unplugged from the
power outlet and the speed selector is on the OFF position.
2. Assemble proper beaters or dough hooks into mixer.
Note: for the beaters and dough hooks, the one with washer can only be
inserted into the big socket and the other one can only be inserted into small
socket. The two dough hooks and two beaters cannot be inserted in reverse.
3. Ensure that the unit is at the 0 setting, then plug in the power source.
4. There are 6 setting. Turn the speed selector to your desired setting and
the appliance will start working. And the speed will increase 20% if the
Turbo Button depressed at any time.
Warning: Do not stick knife, metal spoons, fork and so on into bowl when
operating.
5. The max operation time per time shall not exceed 3 minutes. When
kneading yeast dough, we suggest that the speed selector should be at
low speed firstly and then use high speed to achieve the best results.
6. When mixing is completed, turn the speed selector to 0 position, unplug
the cord from power outlet.
7. If necessary you can scrape the excess food particles from the beaters or
dough hooks by rubber or wooden spatula.
8. Hold the beaters/dough hooks with one hand and press the Ejector
button firmly down with the other hand, remove the beater/dough hooks.
Note: Remove the beaters/dough hooks by pressing eject button only at the 0
3