Unpacking Your Avalon Water Cooler - Avalon A14-S Manual Del Usuario

Unpacking your Avalon Water Cooler

The unit has been cleaned prior to departing from the factory. To remove any
dust and debris that may collect during shipping we recommend cleaning the
unit prior to installation. For cleaning instructions, see pages 20-25.
Locating Dispenser
Do NOT plug in the power cord yet.
Place dispenser upright on a hard and level surface in a cool and shaded
location near a grounded wall outlet. Position the dispenser so there is about four
inches of clearance from the wall on the back and both sides.
Unpacking
Unpack the machine, open the cabinet to remove the drip tray, and install it by
inserting it into place at the top of the cabinet door, see page 11.
English
Getting Started
8