König Electronic KN-OPTRCA10 Manual De Uso página 2

Introduction:
This digital to analogue audio converter is designed for either home or professional audio conversion.
It converts coaxial and Toslink input signals to analogue stereo audio signals for R/L outputs. This
converter is small in size and easy to install.
Specifications:
• Output: 2x RCA
• Input: Toslink, Coaxial
• Sampling rate: 48 kHz
• Operating temperature: 0°C to +70°C
• Storage temperature: -10°C to +80°C
• Power supply: 5 V DC 1 A
• Power consumption: 0.5 W
Panel description:
Study the panel below and become familiar with the signal input(s), output(s) and power requirements.
BACK
OUTPUT
Operation:
Before installation, make sure all devices you wish to connect have been turned off.
• Connect the A/V receiver or amplifier to the converter using appropriate Toslink or coaxial cables.
• Connect the audio source device to the converter using appropriate R/L.
• Insert the DC side of the 5 V power supply into the converter and then connect the AC side of the
power supply to the wall outlet.
Safety precautions:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
from mains and other equipment if a problem should occur. Do not expose the product to water or
moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
ENGLISH
UPPER PANEL
To reduce risk of electric shock, this product should ONLY be opened by
an authorized technician when service is required. Disconnect the product
2
FRONT
INPUT