Sanus Systems WFV66 Manual De Instrucciones página 11

Step 14: Add Mid Shelves
Thread a Shelf Pin (e) into the desired location in the Panels (v,w,x). For each shelf, four Shelf Pins will be required. Insert each Mid
Shelf (r) into the assembly and press fit onto the Shelf Pins. Make sure the wood strip on each shelf is facing toward the front. See
Diagram 14 for assistance. Note: Diagram 14 is a Back View.
Detailed View
e
Step 15: Add Back Panels
Position each Back Panel (u) up against the assembly and thread a Wood Screw (f) through it and into the Back Stretcher (p). Re-
peat process until each Back Panel is secured with four Wood Screws. Tighten each with a Phillips screw driver. See Diagram 15 for
assistance.
v
Diagram 15
Diagram 14
x
r
f
x
w
Detailed View
p
u