Lorell Hutch 69382 Instrucciones De Montaje

Assembly Instructions
cover Exposed Klix Cam
cover Exposed Klix Cam
Before placing hutch on the defined surface, apply
double stick tape to the bottom of the two end panel legs/
supports. Set place in desired location. NOTE: Once unit is
set down, it will be difficult to move/adjust position. Please
ensure that it is placed in the location desired.
IMPORTANT NOTE:
• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
• Check to be sure that you have all parts and hardware.
• Remove all wrapping materials, including staples and packing straps before you start to assemble.
• Don't tighten all screws/bolts until all completely assembled.
• Keep all hardware parts out of reach of children.
• It is recommended for 2 persons to complete this assembly.
Use Cam Cover (A) to
LLR69384/69418
A B
Cam Cover Double Stick Tape
24 Pcs 1 Pc
Use Cam Cover (A) to
69382/69383/69384/69416/69417/69418/69912/69913
LLR69382/69416
LLR69383/69417
LLR69912/69913
A
Cam Cover
24 Pcs
Before placing hutch on the defined surface, apply
double stick tape to the bottom of the two end panel legs/
supports. Set place in desired location. NOTE: Once unit is
set down, it will be difficult to move/adjust position. Please
ensure that it is placed in the location desired.
B
Double Stick Tape
1 Pc
Two people are required to
assemble and move this model.
Hutch