How To Operate; Helpful Tips - Nostalgia Products NCLHDRTO8AQ Instrucciones Y Recetas

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

HOW TO OPERATE

Place the HOT DOG ROLLER & BUN WARMER on a stable surface near an electrical
outlet before starting. Always make sure that the cord is away from any water source.
It is acceptable to use an extension cord if necessary. Once confirmed plug in unit.
Place the Drip Tray/Crumb Tray is in place. NOTE: The Drip Tray/Crumb Tray can be placed
either under the bun warmer racks or right below the hot dog rollers.
The POWER BUTTON switch on the right of the HOT DOG ROLLER turns on the
power. Turn to the ON position. The indicator light will then turn red.
Place the hot dogs on the Rollers (evenly spaced). Up to eight regular-
sized hot dogs or 12 breakfast sausage links can be cooked at one time.
Place buns and toppings inside BUN WARMER. NOTE: To prevent buns from
drying out, wrap in foil or paper towel prior to placing in warmer.
CAUTION: Always keep the clear, top cover open while cooking.
Turning the TIMER dial will activate the heating elements. Turn TIMER dial to
desired amount of time to begin cooking process. NOTE: Turning the TIMER
dial also activates heating elements inside the bun warmer as well.
As the hot dogs cook, they will begin to darken in color. Depending on the type and size of
hot dog cooking time will vary. The thicker the hot dog, the longer it will take to cook through.
NOTE: Don't forget to keep an eye on the buns or toppings in the warmer as well!
Once hot dogs are cooked thoroughly, using tongs (not included), remove a bun from the bun
warmer and a hot dog from the hot roller. Repeat until all hot dogs and buns are gone.
CAUTION: Use tongs (not included) as BUN WARMER & HOT DOG ROLLERS will be hot.
After the cooked hot dogs are removed from the Rollers, they can be replaced with new hot
dogs to cook if desired. CAUTION: Use tongs when adding more buns and hot dogs as unit
may still be hot. NOTE: Remember to reset the timer to resume the heating process.
By following these simple instructions, your HOT DOG ROLLER & BUN
WARMER will be fun for friends, family, and kids of all ages!
Any other servicing should be performed by an authorized service
representative. When not in use, the machine should be unplugged,
allowed to cool and stored in a safe and dry location.

HELPFUL TIPS

POWER LIGHT
If the red power indicator light does not come on after turning the dial to the ON
position, check the electrical plug to make sure it is fully plugged into outlet.
ROLLERS
If the Rollers are not turning, make sure the power light is on and
the unit is fully plugged into outlet. Turn unit off and on again. Make
sure the end roller pin is correctly inserted into the Base.
Sometimes hot dogs are square in shape which prevents them from rolling properly.
Rotate the hot dogs, using tongs, on the Rollers until they begin to plump from
cooking. They will eventually even out in shape and automatically move on the rollers.
If hot dogs are cooking unevenly, move the hot dogs
from one side of the Rollers to the other.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido