Power On/Power Off - Nevir NVR-TAB101QHD S2 Manual De Usuario

4. Earphone Jack
5. Micro USB interface
6. HDMI interface
7. DC charger interface
8. Home
9. Mic
10. Back Camera
11. TF-CARD interface
12. Loudspeaker
II. Operation Instruction
1. Basic Operation

1.1. Power on/Power off

Power on
Press and hold the power switch for 5 seconds; the unit displays the
start-up logo and enters the working mode.
Power off
Press and hold the power switch for 5 seconds to turn the unit off.
Sleep
While the device is at working status, press the power switch, it
enters the sleeping mode, and the screen will be off then. Press the
power switch again, it shift to the normal mode. You may use this
function when you don't' use the device temporary to save power.
1.2. Charging
When the device prompts low battery, please charge it by provided
charger.
Note: To improve the longevity of the battery, you may charge for
another 15 minutes after it prompts the battery is full.
1.3. Main menu
Click the
appeared. It including the system setting, music playback, video
playback, web browser and other applications you installed in the
main menu.
icon in the main interface, the main menu is
12