Promate RoadGear-2 Guia Del Usuario página 5

3. Charging RoadGear-2 back-up battery via AC Adapter
•Disconnect the Battery Pack as shown below
• Use the AC Adapter and connect the adapter plug into RoadGear-2's battery
pack charging input port and plug the AC Adapter into the wall socket.
4. Charging USB chargeable devices using RoadGear-2
• Plug the USB cable into one of the USB charging output ports on RoadGear-2
and the other end into the device.
• The device will now automatically start charging.
• Detach the USB cable once charging is complete.
5. Using the LED
• Press the LED power switch to switch on/off the LED flash light.
English English English
4