Care And Maintenance - AquaSource AT1203-00 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

8. Adjust Tank Water Level
The fill valve and tank water level are set at the factory and
should not require adjustment. However, the water level is
controlled by the float on the fill valve and can be adjusted by
turning the adjustment screw as desired.
9. Install Seat
Place seat (C) on bowl (B), centering the hinges over the
holes in the bowl (B). Place plastic seat washers (II) on
plastic seat bolts (HH) and insert plastic seat bolts (HH) into
hinge holes. Use a screwdriver and plastic seat nuts (JJ) to
secure seat (C) to bowl (B). Close hinge covers.
CAUTION: Do not use in-tank cleaners. Products containing chlorine (calcium hypochlorite) can seriously
(calcium hypochlorite).
The toilet is made of stain-, acid- and abrasion-resistant vitreous china. Clean the outside surfaces with mild soap, warm
water and a soft cloth. On stubborn stains use a powdered detergent and damp sponge or nylon scouring pad. Never use
abrasive scouring powders, cleansers or pads because they will scratch, damage and dull the surface.
When cleaning the toilet seat, wash it with mild soapy water. Rinse seat thoroughly with clean water and dry with a soft
cloth. Avoid detergents, disinfectants or cleaning products in aerosol cans. NEVER use abrasive scouring powders
on the seat. Some bathroom chemicals may cause damage to the seat's finish, so test your cleaning solution on an
inconspicuous area before applying to the entire surface.
of manufacturing defects in materials and workmanship. This warranty is not transferable.
The manufacturer, at its election, may repair, replace or make appropriate adjustments where inspection discloses any
such defects occurring in normal usage. No warranty is given for installation mistakes, water damage or misuse. For a
or replacement. Purchaser shall be responsible for all shipping charges for returned product. This warranty gives you
417-7564.
INSTALLATION INSTRUCTIONS

CARE AND MAINTENANCE

ONE-YEAR LIMITED WARRANTY
Adjustment
Screw
C
o obtain warranty service, contact 1-866-
5
HH
II
JJ
The manufacturer

Publicidad

Tabla de contenido
loading

Tabla de contenido