Eldom ZMG11 Manual De Instrucciones página 11

1
2
3
4
5
6
7
TRIMMER - GENERAL DESCRIPTION
1. Cutting head cover
2. Cutting head
3. Blade chamber
4. Blade
5. Switch
6. Body
7. Battery cover
USE
The trimmer is designed for trimming nose and ear hair.
POWER SUPPLY
The device is powered by one AA alkaline battery – not included.
How to install the battery:
- turn the device off by setting the switch (5) to "OFF"
- rotate the cover (7) counter-clockwise and remove it
- insert the battery – pay attention to the orientation – Fig. 1.
- place the cover (7) as shown - Fig. 2 and turn clockwise to lock it in place.
Dispose of used batteries in the dedicated containers.
TRIMMING
- remove the cover (1)
- turn the device on by setting the switch (5) to "ON"
- carefully put the cutting head (2) in the nose or ear and cut the hair.
- when the trimming is done, turn the device off by setting the switch (5) to "OFF" and place the cover (1)
CLEANING AND MAINTENANCE
Clean the blade (4) and the cutting head chamber (3) after each use.
- rotate the chamber (3) counter-clockwise and remove it
- remove the blade (4) – Fig. 3
- clean the blade (4) and the head chamber (3)
- insert the blade (4) into the head chamber (3)
- attach the chamber (3) onto the body (6) as shown, and rotate it clockwise – Fig. 4.
fot. 1
fot. 2 fot. 3
TECHNICAL DATA
- power supply: AA battery, 1 pc.
12
fot. 4