Techno Line WS8013 Manual Del Usuario página 9

Press the "+" (B4) or the "-" (B5) button to set 12 Hour or 24 Hour time display.

Press the "MODE" button (B1) to confirm the changes and RCC on is flashing.

Press the "+" (B4) or the "-" (B5) button to set RCC to on to activate radio controlled time

or to RCC off to deactivate radio controlled time.
Press the "MODE" button (B1) to confirm the changes and time zone 00 (CET) is flashing.

Press the "+" (B4) or the "-" (B5) button to set a value of +/-23 hours time difference to

CET (-01 for UK time).
Press the "MODE" button (B1) to confirm the changes and the language is flashing.

Press the "+" (B4) or the "-" (B5) button to set the weekday language from the following

options: German, English, French, Italian, Dutch, Spanish, Danish, Czech, Polish,
Swedish.
Press the "MODE" button (B1) to confirm the changes and the hour is flashing.

Press the "+" (B4) or the "-" (B5) button to set the hour.

Press the "MODE" button (B1) to confirm the changes and the minute is flashing.

Press the "+" (B4) or the "-" (B5) button to set the minute.

Press the "MODE" button (B1) to confirm the changes and the second is flashing.

Press the "+" (B4) or the "-" (B5) button to set the seconds to 00.

Press the "MODE" button (B1) to confirm the changes and the year is flashing.

Press the "+" (B4) or the "-" (B5) button to set the year.

Press "MODE" button (B1) to confirm the changes and the month is flashing.

Press the "+" (B4) or the "-" (B5) button to set the month.

Press "MODE" button (B1) to confirm the changes and the date is flashing.

Press the "+" (B4) or the "-" (B5) button to set the date.

Press "MODE" button (B1) to confirm the changes and the temperature unit is flashing.

Press the "+" (B4) or the "-" (B5) button to set the temperature unit as °C or °F.

Press "MODE" button (B1) to confirm the changes and the alarm sound duration unit is

flashing.
Press the "+" (B4) or the "-" (B5) button to set the alarm sound duration.

Press "MODE" button (B1) to confirm the setting and return to time display mode.

Note:

All Setting mode will automatically exit in 15 seconds without any adjustment
 For Time Zone: If you receive no RC-DCF frequency signal, the time zone should be set
to 0. Time Zone is used in countries which can received the DCF frequency signal but the
time zone is different from German Time.
Alarm sound duration: there are two options available, "1 minute" and "2 minutes".


Second only can be adjusted to 0.
By keeping the "+" (B4) or "-" (B5) button pressed, will accelerate the process and reach

EN03