Lemeks IMPREST Sandy Manual Del Usuario página 5

Montaaži-, paigaldus- ja hooldusjuhend v1.1
Assembly, installation and maintenance instructions v1.1
EN
Read these instructions carefully prior to assembly and check the number and condition of the parts.
Assembly
Sand pit must be installed in accordance with the drawings included in the manual. Measuring tape, spanners,
cordless drill and a wood drill are required for assembly. Before screwing, please drill hole in order to avoid
cracks in the wood.
Installation
Children's swing set must be installed on a smooth surface covered with an appropriate material: sand, bark or well-maintained grass. The distance
between the swing set and other objects (including those situated above the ground, such as tree branches) should be at least 2 metres. The sand is not
included in the kit.
Use
All projecting screws and sharp edges must be planed smooth immediately after installation to avoid potential injuries. Stability, wear on the moving
parts and strength of connections should be checked no less frequently than every 1 to 3 months. The suitability of the base material, corrosion of
accessories and rotting of wooden parts should be checked once a year.
Warning!
•
This product is designed to be used by children from the ages of 3 to 14.
•
To be used under the direct supervision of an adult.
•
Use of the product by children under the age of 3 is not permitted. Choking hazard.
•
Items of clothing causing increased danger such as hoods, buttons, etc., may become caught during use of the product and may therefore
present a risk of suffocation to the wearer.
•
The product is only designed for outdoor use in private residences.
NB! The structure MUST NOT be altered without the consent of the manufacturer, otherwise risk of serious injury. These instructions should be
kept in order to avoid later disputes.
For your information:
Wood, as a natural material, is sensitive to changes in the environment. Fluctuations in temperature and weather conditions may cause the wood to
split and harden – particularly in the case of machine-cut wood products. However, this generally does not affect the strength of the wood.
TREATED TIMBER CONTAINING A BIOCIDAL PRODUCT. Control of wood destroying organisms.
Active Ingredients: copper carbonate / copper hydroxide (1:1) and boric acid.
Wear gloves when handling timber. Avoid inhalation of sawdust. Do not use in contact with drinking water or for direct food contact. Do not use for
animal bedding or in fish ponds. Dispose of treated wood responsibly. Industrial waste should be disposed of through an authorised waste contactor.
Ø2 Ø3