Operation Instructions
1. Installation
Install MotionFlux in an area where it can serve the function of an
auto-shining light source for your own convenience. It comes with a rechargeable
battery, so you can use it without spending any extra money. Find an appropriate
mounting location that is free from extremely cold or hot temperatures.
Use screws that are fixed on the wall for mounting. You can also use the
provided sticker for installation.
2. Operation
Once mounted, you can start using the MotionFlux as needed. The amount
of time that the MotionFlux stays on will depend on how much charge it carries.
It can last for up to 7 hours if charged fully for 3 hours. If set to ON,
it will run down the battery and may last anywhere from a few minutes to
a few hours depending on how much charge is available. User discretion is advised.
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and components
which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end of-life should be
disposed of separately from your household waste.
Please dispose of this equipment at your local community waste
collection/recycling center.
This product complies with European safety and electrical interference directives
This product does not contain environmentally hazardous materials (lead, mercury,
cadmium, hexavalent chromium and brominated flammable agents: PBB and PBDE).
English
4