General Description - Eldom toasti ST120N Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
OPERATING INSTRUCTION
EN
TOASTER ST120N
A

GENERAL DESCRIPTION

1. Locking tab
2. Handgrip
3. Cover
4. Indicator lights
PMake sure that the appliance, the plug and the power cord are in order and that all parts of the
packaging have been removed before you start using the appliance.
Important:
The appliance may give off a smell while being used for the first time. The smell is associated with
the manufacturing procedure. It is a natural process which ceases to occur after a certain period of
time. Ensure a suitable ventilation in the room, e.g. by opening a window. Use the toaster with any
food products while using it for the first time.
- Set the appliance on a flat, stable and high temperature resistant surface.
- Assemble relevant heating panels. The appliance is equipped in three types of heating panels:
- for waffles (A)
- for sandwiches (B)
- for meat (C)
In order to take the panels out, one shall push the buttons located above the
panels (photograph 2).In order to place the panels, one shall insert their lower
edges and push from the up.
- Run the cooking plates (5) with a wet cloth and lubricate with grease.
- Close the cover (3), make sure that the locking tab (1) is properly locked.
- Connect the appliance to the mains. A red indicator light will go on.
- The appliance is heating up. The green indicator light indicates that the appliance has reached a
10|EN
B
C
Cooking plates:
A. For baking waffles
B. For roasting sandwiches
C. For meat
3
4
2
1
TECHNICAL DATA
- power: 700W
- power supply voltage: 230V
~ 50HzHz

Publicidad

Tabla de contenido
loading

Tabla de contenido