FILTERS
Check the condition of the filters (5 and 7) regularly and clean them if necessary.
Two types of filters can be used in a vacuum cleaner:
-
HEPA (5),
-
canvas (7),
Additionally, a sponge filter is installed in the lid (3). Unscrew the lid to access the filter Fig.
5-6.
Filters are consumables and are subject to natural wear and tear; therefore, they
cannot be replaced under warranty.
New filters are available under the symbols OKF101 (HEPA filter (5)) and OKF102 (canvas
filter (7)).
EMPTYING THE CONTAINER
Regular emptying of the container ensures proper operation of the vacuum cleaner and
helps maintain its optimum suction power.
-
make sure that the appliance is turned off.
-
open the lid (3) by releasing the fixing clamps (11),
-
remove rubbish from the HEPA filter (5) or from the canvas filter (7),
-
do not clean the HEPA filter (5) with water every time but only in case of heavy soiling.
Having cleaned it with water, dry the HEPA filter thoroughly (leave it to dry for at least
24 hours) before reusing it.
-
wipe the container's (12) interior with a damp cloth.
ENVIRONMENTAL PROTECTION
-
the appliance is made of materials which can be recovered or recycled
-
the appliance should be handed over to the appropriate centre of collection and
recycling of electrical and electronic equipment.
WARRANTY
-
the appliance is intended for personal use at a household,
-
it is not intended for professional purposes,
-
in case of misuse, the warranty is rendered null and void.
EN|13