Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Display Mode
• Select display mode.
•
is auto-scan, automatically switch channel in circle from channel 1
through to
.
• Press '+'or '- ' button on monitor or VOL +/- on remote control to switch option.
Press
on monitor or 'OK' on remote control to select the channel and exit
the menu.
Pairing
• Pairing Camera: select the channel you want to pair.
• Press '+' or '- 'button on monitor or VOL +/- on remote control to switch option.
• Press
button on monitor or 'OK' on remote control to start pairing.
When pairing is in process, there will be pairing icon
correspondent channel.
Pairing icon will be replaced with a check mark when pairing is successful. If no
camera pairs successfully in 20 seconds, the pairing icon will disappear and the
pairing process will stop.
Delete Camera: remove the camera that is already paired to the selected channel.
Record Control
• Select to start and stop record.
• Press
button on monitor to start record or stop record.
When camera is not connected, press record, a grey dot
left, and nothing will be recorded.
When camera is connected, press record, a red dot
and video is recorded.
Folder will be automatically increased as record files increase, one folder will
contain max. 997 video files, automatically create new folder when one folder is
full. The greater the file number, the newer the file, when SD card is full, will start
overwrite from the oldest file.
• Press '+' or '- 'button on monitor or VOL +/- on remote control to switch option.
• Press
Camera: show the channel that record file belongs to
Name: file name
Create: date and time that the file created
Group Num: group num increases every time start new record, files with same
group num are from the same record, eg: 4 channels recorded in quad view at the
same time, the four video files for each channel will have the same group num.
on top of the
When playback file is recorded under split view, a window will appear to select
playback in multiple channel view or single channel view.
will appear on the top
will appear on the top left,
Playback
button on monitor or 'OK' on remote control to start playback.
Page 4 of 9
Publicidad
Tabla de contenido
