Fitting Instructions; Cleaning And Care; Storage - OWIM HG04131A Instrucciones De Utilización Y De Seguridad

P Fitting instructions
ATTENTION! BRUSH EXCESS HAIR ASIDE AND REMOVE
ANY EAR JEWELLERY OR SPECTACLES THAT MAY
AFFECT ACOUSTIC SEAL BEFORE ATTEMPTING TO FIT
THE NOISE PROTECTION HEADPHONES.
Pull the earmuffs
that the cushions
For optimum noise reduction the cushions should form a snug fit
against the head.
Slide the earmuffs up or down to find the position where the
earmuffs completely cover your ears. When properly installed and
adjusted, the earmuffs should not touch the headgear shell or visor
surround.
Check the seal of the earmuff cushions around the temples of your
eyeglasses. If you don't get a good seal around your glasses, you
may get less protection from noise.
Check the fit by talking out loud. Your voice should sound hollow,
like you are talking in a barrel. The noises around you should not
sound as loud as they did before you put the earmuffs on.
The wearer should ensure:
The earmuffs are fitted, adjusted and maintained in accordance
with the manufacturer's instructions
The earmuffs are worn at all times in noisy surroundings
The earmuffs are regularly inspected for serviceability
P Cleaning and care
Use a dry / slightly dampened, soft and lint-free cloth with mild
detergent for cleaning and care.
Fold up the earmuffs for for easy, convenient storage.
P Storage
Store the product in a dry environment, protected from dust and
direct sunlight.
2
apart and place the product over the ears so
completely sealing around the ears (see Fig.B)
3
GB/IE 17