Panasonic VIERA Serie Manual Del Usuario página 8

■
Assembling the pedestal
Fix securely with assembly
A
screws . (Total 4 screws)
Tighten screws firmly.
A
Bracket
Front
(Image: TBLX0165)
Place the TV at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including reflections) will
fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation
is essential to prevent an internal component failure. Keep away from areas of excessive heat or moisture.
Adjust the LCD panel
to your desired angle.
Note
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.
Do not place any objects or hands within the full rotation range.
WARNING
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Reference of connection
Antenna terminal
Firmly tighten by hand.
8
Attaching the pedestal to TV
■
Set-up
Fix securely with assembly
screws . (Total 4 screws)
Tighten screws firmly.
Base
Foam mat or thick
soft cloth
Pin terminals
red blue
Match colors of plugs and terminals.
Insert firmly.
B
B
Location
15°
b
15°
a
(View from above)
green
green
Accessories
Assembly screws
(4 of each)
A
M5 x 15
B
M4 × 12
Bracket (1)
Base (1)
TC-L37D2X
a: 15.8 " (399 mm)
b: 11.1 "(280 mm)
TC-L42D2X
a: 17.8 " (450 mm)
b: 12.2 " (309 mm)
HDMI terminal
Insert firmly.