Switch Replacement - Accessory Power ENHANCE PATHOGEN ENPAKNO100BKUS Guia De Inicio Rapido

Programming game mode
Game mode allows the user to define which keys are illuminated.
Hold down FN and press the SL (scroll lock) key until you arrive at the game mode.
Game mode can be identified by the illuminated WASD keys.
Press FN + INS to cycle through each of the 6 game modes.
To modify a game mode, press FN + DEL. Press the keys you would like to have illuminated.
Press FN + DEL to save the settings.
Keycap puller
The keycap puller is located under the keyboard.
Press the keycap puller down on top of a keycap
until it clicks. Pull straight up to remove keycap.
Important Note
To ensure stability, the removable optical switches are
firmly seated into the machined aluminum top plate.
To ensure the switch remains well seated, only remove
switch if switch replacement is required.

Switch replacement

Remove keycap. Surrounding keycaps may need to be
removed. With the switch remover pressed against
the metal faceplate, its claws positioned at the top and
bottom of the switch (not side-to-side), place your
fingers toward the bottom of the switch remover and
squeeze. The switch remover claws will press inward
under the switch, releasing the locking tab. Pull upwards
toward the top of the keyboard while carefully rocking
the switch out of its location.
9