Publicidad
Idiomas disponibles
Idiomas disponibles
GREASE GUN LOADING
Grease guns have multiple loading options:
1. Cartridge Loading: Paper or plastic cartridge
2. Bulk Loading
3. Suction Loading
4. Filler Pump Loading (only on Grease Gun models fitted with bulk
loader valve
Follow the steps below for the appropriate loading option
Cartridge Loading
1. Unscrew Grease Gun Head from the Barrel counter-clockwise
2. Pull back the Plunger Rod Handle all the
way back & lock it with the End Cap
3. Remove the
plastic cap from
the open end of the
Grease Cartridge
& fully insert into
the empty Grease
Gun Barrel. Make
sure the rim of the
Cartridge is seated
on the rim of the
Barrel
4. Remove the
metal Pull tab seal
from the Grease
Cartridge
Bulk Loading
3. Scoop out clean
Grease from the Bulk
Grease Container into
the empty Grease Gun
Barrel.
4. Once the Barrel is
full, shake the Barrel
to allow grease to
settle down. Fill in more
grease if additional
space is created in the
Barrel, to completely
fill it
Suction Loading
2. Insert the open end
of the Barrel into the
Greasebucket to about
2"(50 mm) deep.
3. Now, slowly pull back
the Plunger Rod Handle
all the way back, to draw
in grease into the empty
Barrel. Lock the Plunger
Rod with the End Cap
4. Shake the Grease Gun
Barrel to allow the Grease
to settle down
2
CAUTION
Grease or an empty cartridge in
barrel is under pressure from the
internal spring, use caution when
removing either end of the barrel
Filler Pump Loading
2. Pull back the Plunger
Rod Handle all the way
back & lock it with the
End Cap. Screw back the
Grease Gun Head tightly
onto the Barrel
3. Check compatibility of
Bulk Filler Valve on your
grease gun with your
Filler Pump, to make
sure they are compat-
ible. Wipe the Bulk Filler
Nipple clean of any dirt
before starting.
4. Insert the Bulk Filler-
Valve onto the Female
Loader Valve of the
Grease Filler Pump. Start
operating the Filler Pump,
keeping your hand on
the Grease Gun, lightly
pushing it down onto the
Filler Pump.
Once the Grease Gun
Barrel is filled, pumping
would get very hard.
Stopat this time
Publicidad
Solución de problemas
