IRIS ZLM03 Instrucciones De Instalación página 2

Installation Instructions – ZLM03 LED Module
7 . Reinstall LED reflector and optical element (trim).
Re-aim and focus the luminaire as required.
LED Reflector Installation
To prevent damage to the LED Module, the LED Reflector
should not come in contact with the dome of the LED
Module. Do not touch the inside reflective surface of the
LED Reflector. Grasp the reflector via the outside surfaces.
1. To remove the glass reflector, turn counter clockwise to
unlock and disengage.
2. To Reinstall, position LED Reflector so that the larger
attachment wing aligns with the larger opening in the
Reflector Retention Ring. The larger opening is marked
with a solid rectangular block. (Figure 3. and 6.)
3. Turn clockwise (Figure 4.) to engage and lock
(Figure 5.).
The LED Reflector is removed by turning counterclockwise
until the stop is reached, then pulling the LED Reflector off
of the Reflector Retention Ring (DO NOT FORCE).
Figurt 3. Position LED Reflector
2
Figurt 4.
Figurt 5.
Larger attachment wing of
LED reflector goes to larger
opening marked with larger
rectangular block.
Figurt 6.
InsoallaoiNn InsorucoiNns – ZLM03 LED MNdult
7466INS ADI140848 www.cooperlighting.com
Turn
Lock
Detailed View