Windows 98SE/Me/2000/XP:
I. Install the Hardware
Turn off your computer and remove its cover.
1.
Insert the PCI card to an available PCI slot firmly.
2.
Secure this card to the rear of the computer chassis and
3.
put back the cover.
Secure the antenna to the antenna connector of the
4.
card.
Turn on the computer.
5.
II. Install the Driver and Utility
The following installation operates under Windows XP.
Procedures are similar for Windows 98SE/Me/2000.
1. "Found New Hardware Wizard" is displayed after the
PCI card is installed and the computer is restarted. Click
"Cancel".
English
2
Version.