15
The load must not be moved into areas which are not visible to the operator. If necessary, he
must ensure he is given help.
The unit must never be operated with more than the power of a person.
Welding work on the unit is prohibited. The unit must never be used as a ground connection
during welding.
Side pull, i. e. side loading of the side plates and/or the load bar is forbidden. The trolley must
be perpendicular above the load at any time.
S
A unit changed without consulting the manufacturer must not be used.
Do not use the hoist for the transportation of people.
Enlarging the adjusted trolley width, e. g. to enable the trolley to negotiate smaller curve radii,
is forbidden.
Only units fitted with hooks with safety latches must be suspended from the supporting pin.
Make sure that the hook is not too large. The supporting pin must be seated centrally in the
saddle of the hook and the hook must be freely articulating.
Do not use the threaded spindle for lifting and/or attaching loads by means of ropes, belts or
chains.
Only one load lifting attachment or hoist may be suspended from the supporting pin of the
hoist.
Never reach into moving parts.
Do not allow the unit to fall from a large height. Always place it properly on the ground.
The unit must not be used in potentially explosive atmospheres.
©
2016 Columbus McKinnon Industrial Products GmbH