EN
Precautions
Read the following instructions carefully, since they give
you useful safety information about installation, use and
maintenance and help you avoid mishaps and possible ac-
cidents.
Remove the packing and make sure that the appliance is intact,
with special attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do
not have to be accessible to the children, in order to preserve
them from danger sources. It is recommended not to throw the-
se packing material in the domestic waste, but to deliver them
to the appropriate station of collection or destruction refusals,
asking eventually information to the manager of the Sanitation
Department of your own municipality.
If the supply cord is damaged, it must be replaced by the manu-
facturer, its service agent or similarly qualified persons in order
to avoid a hazard.
Before connecting the appliance make sure that the mains volta-
ge corresponds to the data specified on the label.
The appliance can be damaged if the voltage is not correct.
If the plug does not suit the socket, let it be replaced with another
suitable plug by qualified personnel only, which shall also ensure
that the section of the socket cables is suitable for your appliance
power absorption.
Generally, the use adaptors multiple plugs and/or extensions is
not recommended; should they be necessary, please use only
simple or multiple adaptors and extensions in compliance with
the safety rules in force, making sure that the capacity absorp-
tion limit marked on the simple adaptors and the extensions and
the maximum power limit marked on the multiple adaptor are
not exceeded. Do not use the appliance if the cable or the plug
shows any damages. Do not use the appliance after a possible
irregular working. In this case, switch it off and do not break it
open. Refer to an authorized Beper after-sale service for repair
and require original spare parts only. Failing to follow these in-
structions may impair the safety of your appliance.
5