Beper 70.405 Manual De Instrucciones página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
Ultrasonic aroma diffuser Use instructions
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable mate-
rials, gases or burning flames.
Do not allow children, disabled people or every pe-
ople without experience or technical ability to use
the appliance if they are not properly watched over.
Close supervision is necessary when any appliance
used by or near children.
Product description Fig. A
1. Motor base
2. Light button
3. Mist button
4. Water tank
5. Water tank cover
6. External ring cover
7. Top decoration
Operating instructions
Filling of the water tank
Place the aroma diffuser on a flat, stable surface. Remove the top decoration, the external ring cover and the
water tank cover. Using a cup or a little jug, fill the tank with water, making sure that the level of liquid does not
exceed the MAX line marked in red inside the tank.
Note: it is advisable to use pure water, mineral water or purified water, in order to avoid limestone and
residues that could obstruct the atomizer.
Add 2-3 drops of your favorite essential oil or fragrance.
Put the water tank cover, the external ring cover and the top decoration back into place, making sure that all
components are well fixed.
Turning on the aroma diffuser
Insert the cable in the connector found on the motor base, and then connect it to the USB adapter provided. Plug
the diffuser to a wall socket, carefully to avoid any water spilling.
Warning: do not move the diffuser when plugged to the wall socket or when operating, to avoid any
water leaking
To turn the light on, press the light button once: the light will automatically fade into the 7 different colors avai-
lable; to chose the color of the light, press the light button until the desired color appears. To turn the light off,
press the light button 9 times.
Press the mist button to activate the mist function; press it again to turn the function off.
Note: The diffuser is integrated with a safety system that will automatically turn the appliance off when
water level is too low. If the diffuser turns off while operating, please check water level in the tank.
Note: room temperature, humidity, etc. could make mist coming out of the diffuser more/less visible
7
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido