Publicidad
INSTRUCTIONS (CONTINUED)
INPUT - Input socket to connect with your guitar using a 6.5mm jack cable.
CLEAN VOLUME use this dial to control the overall volume of the clean channel
CLEAN LAMP This lamp illuminates when the clean channel has been selected.
CHANNEL SELECT BUTTON Press this button to toggle between the clean channel and the drive channel.
DRIVE LAMP - This lamp illuminates when the drive channel has been selected.
DRIVE GAIN Use this dial to change the amount of volume going to the amplifier. Turn clockwise for more distortion, turn
anticlockwise for less.
DRIVE LEVEL use this dial to control the overall volume of the drive channel.
BASS use this dial to adjust the low frequency level, with a cut/boost of +/-15dB
MID use this dial to adjust the middle frequency level, with a cut/boost of +/-15dB.
MID FREQ use this dial to adjust the frequency of the mid frequency controlled by MID dial (9). Fully anticlockwise = 200Hz,
fully clockwise = 5KHz.
HIGH use this dial to adjust the high frequency level, with a cut/boost of +/-15dB
CHORUS use this dial to adjust the amount of chorus added to the output sound. Fully anticlockwise operates as OFF.
DELAY use this dial to adjust the decay time for the delay added to the output sound. Fully anticlockwise operates as OFF.
AUX INPUT - Input socket to connect with external media players using a 6.5mm jack cable. Note this input will accept a
stereo jack cable.
MP3 - Input socket to connect with external media players, such as mp3 players using a 3.5mm jack cable. Note this input will
accept a stereo jack cable.
PHONES Output socket to connect to headphones using a 6.5mm jack cable. Note when headphone are connected to the
POWER use this switch to turn the amplifier on and off.
Publicidad
