Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL INFO
Article
Scope of
supply
1
Specification
2
Functions
Warranty
COMPONENTS
Multi-functional button with an LED indicator (❶), control block (❷), radiating panel(❸),
built-in brackets for wall mounting (❹), 2 m power cord (❺), legs for floor installation
(❻), fastening bolts for legs (❼), holes in brackets for wall mounting (❽), holes in
brackets for attaching the legs (❾), temperature sensor (❿), four screws with four
dowels (⓫).
WALL MOUNTING INSTRUCTIONS
Brackets for fixing the heater to the wall ❹ are built into the heater's design. Please note
that the brackets ❹ allow the heater to be hung vertically or horizontally. Select a location
for the heater and place marks for the holes on the wall accordingly. Check once again that
these are correct and drill the holes with a hammer drill or electric hammer drill. Install
the supplied fixing bolts and dowels ⓫ into the resulting holes. Gently lean the heater
against the wall and hang it on all four fasteners ❽ at the same time, make sure that it
connects at all points and that the heater is securely fixed. If necessary, adjust the depth
of the bolts into the dowels.
FLOOR INSTALLATION INSTRUCTIONS
To install the heater on the floor, you need to fix the two metal legs ❻ onto the wall
brackets ❹ through the special holes ❾. In its floor-mounted orientation, the heater can
only be positioned horizontally. Use two bolts ❼ from the kit to attach each of the legs.
Make sure that the bolts have been securely tightened and the feet have been installed in
the correct direction. The heater is now ready for installation.
CONNECTING TO THE APP
1. Mount the heater according to the instructions above and connect it to an electrical
outlet. The heater will then automatically enter pairing mode for 5 minutes.
2. Connect your smartphone to a Wi-Fi (2.4GHz) network and log in to the Perenio Smart
or Perenio Lite app (or download the application from Google Play or Apple Store and
create a new account). Click on the "+" icon and follow the instructions on the screen.
3. Activate your device in Google Home, Yandex Smart Home (Alice), Amazon Alexa
4. Set up timers or configure working scenarios via the app.
SAFETY OPERATION RULES
Protect the heater from water and mechanical damage. Keep out of the reach of children
and pets, due to possible burns on contact. When switched on, do not place on carpets or
near curtains or upholstered furniture. Mount only on stable surfaces. You should not cover
the working heater with anything, or attempt to dry things on it.
TROUBLESHOOTING
1. When switched on, the heater does not heat up. - The desired temperature has been set
incorrectly. Increase the desired temperature higher than the current one.
2. The heater does not respond to commands from the application. - The network
connection has been interrupted. Reconnect the device and phone to the Wi-Fi access
point.
3. During operation, the heater beeps and the LED indicator flashes red. - The heater is on
a potentially dangerous incline. Return the heater to an upright position.
1
Some components, accessories, and/or functions may not be present in your heater configuration. See the box or
product page at perenio.com.
2
The device is intended for indoor installation. Operating conditions: 0°C to +40°C, 35-85% RH (non-condensing).
3
All information contained herein is subject to amendments without prior notification of the User. For current
information and details on the device description and specification, connection process, certificates, warranty and
quality issues, as well as the Perenio Smart/Perenio Lite app functionality, see relevant Installation and Operation
Manuals available for downloading at perenio.com/documents. All trademarks and names herein are the property of
their respective owners. See operating conditions and date of manufacture on the individual packaging.
4
Perenio Smart app is a primary mobile application where all Perenio® devices may be activated, while Perenio Lite
is a simplified version with limited functionality for certain devices.
5
For some third-party applications, the Eco Smart Heater device must be first activated in the Perenio Smart or
Perenio Lite app.
Developed in the Czech Republic by Perenio IoT spol s. r.o. (Czech Republic, Ricany - Jazlovice 251 01, Na Dlouchem,
79). Made in Latvia. All trademarks and names thereof are property of their respective owners.
4
PEJPH01 (White), PEJPH02 (Black), PEJPH03 (Silver), PEJPH04 (Gold)
Perenio Joule Eco Smart Heater with a control unit and a built-in power
cord (2 meters), legs for floor installation, bolts, screws with dowels,
Quick Start Guide, Warranty Card
Wi-Fi: IEEE802.11 B/G/N20 of 2.4 GHz, supply voltage: 220V to 240V,
50Hz, standby power of less than 1W, power of 700W to 800W (in
heating mode).
Types of protection: current – up to 10A, voltage – up to 260V, panel
temperature – up to 150°С, electronic gyroscope – shutdown when
falling.
Casing: Tempered glass heat-emitting panel, ABS plastic control box,
power button with integrated LED indicator.
Dimensions: 1000mm x 356mm x 32mm (without brackets)
Automatic maintenance of the set temperature in the room, remote
control and integration into the smart home system, safety of use
thanks to a multi-level protection system
2 years (Service life: 4 years)
3
Doc Date: 30/09/2020
©Perenio IoT spo l s r.o.
4
5
.
Version: 1.0.0
All Rights Reserved
Publicidad
