Pro-Lift T-5310 Instrucciones De Operación página 4

ASSEMBLY (con't)
3. With the Lawn Mower Lift in the raised postion, hold the track with the springs facing up and the bottom of the
track against the wheel bracket. (see fig. 3)
Notice: Stopping Plate should be facing outside of Lawn Mower Lift.
4. Make sure the springs are against the wheel bracket and rotate the track around towards the front of the lift
(see figure 4). As the wheel tracks are rotated, the attachment spring should catch the back of the wheel bracket
(see figure 5).
Figure 4 - Beginning of rotation
5. Repeat steps 2 through 4 for the other side.
6. Lower the Lawn Mower Lift to the ground, and swivel the Stopping Plates outward (see figure 6).
Figure 3 - Starting assembly position
Figure 5 - Attachment Springs catching at end of
Figure 6 - Final assembly
4
rotation