Specific Safety Instructions - VONROC SL502 Serie Traducción Del Manual Original

EN
1. SAFETY INSTRUCTIONS
The following GREEN SQUARE symbols indicate
proper use. The following RED CIRCLE symbols
indicate misuse and are provided as a visual
reminder for use. They are not an exhaustive list of
use instructions or warnings. Care, diligence and
common sense must be provided by the user when
using the ladder to avoid accident or injury.
Failure to follow any provided instructions will void
your warranty and could be considered misuse.
Explanation of the symbols
Read the instructions carefully.
WARNING - Falling from ladders can
cause serious injury or death. Heed all
safety precautions.
Maximum total load.
Inspect the rubber feet before each
use on wear and tear.
Inspect the ladder before each use on
damages.
Maximum number of users.
Open the ladder fully before use.
Inspect the ladder after delivery.
Before very use visually check if the
ladder is not damaged and is safe to
use. Do not use a damaged ladder.
Do not overreach. Avoid work that
imposes a sideways load on ladders,
such as side-on drilling through solid
materials.
2
Do not step off the side of standing
ladder onto another surface.
Do not place the ladder on a unlevel or
unfi rm base.
Do not use the ladder on a unlevel or
unfi rm base.
Do not erect ladder on contaminated
ground.
WARNING - Electricity hazard. Identify
any electrical risks in the work area,
such as overhead lines or other exposed
electrical equipment and do not use the
ladder where electrical risks occur.
Ladder for domestic use.

SPECIFIC SAFETY INSTRUCTIONS

Failure to adhere to the warnings and instructions
contained in this manual and on the product could
result in serious or fatal injury.
- Do not spend long periods on a ladder without
regular breaks (tiredness is a risk).
- Prevent damage of the ladder when transporting
e.g. by fastening and, ensure the ladder is
suitably placed to prevent damage.
- Ensure the ladder is suitable for the task.
- Do not use the ladder if contaminated, e.g. with
wet paint, mud, oil or snow.
- Do not use the ladder outside in adverse
weather conditions, such as strong wind.
- When positioning the ladder take into account
the risk of collision with the ladder e.g. from
pedestrians, vehicles or doors. Secure doors
(not fi re exits) and windows where possible in
the work area.
- Use non-conductive ladders for unavoidable live
electrical work.
- Do not modify the ladder design.
- Do not move a ladder while standing on it.
- Stepladders and ladders must always be positi-
WWW.VONROC.COM