Monogram ZUG30 Manual De Instrucciones

To install the Heater Unification Kit(s), see the installation instructions that came with the unit to be
installed.
Open the Heater Unification Kit(s) and make sure all parts are included. You will need one Heater Unification Kit
for each unit other than the first.
1. Trim cover (ABS) : 1 piece
2. Trim cover holder clips with double-sided adhesive tape : 8 pieces (2 are different)
3. Back side bracket (metal corner piece) : 2 pieces
4. Screw M6x45 : 3 pieces
5. Nut M6-8 : 3 pieces
6. Washer 6-INOX : 6 pieces
7. Screw 4.8x13 (for bracket attachment) : 4 pieces
8. Strain relief (for heater wiring) : 1 piece
9. Screw M4x18 : 2 pieces
10. Washer A4-NR : 4 pieces
11. Nut M4x3-NR : 2 pieces
12. Heater : 1 piece
13. Transformer with Heater jumper harness - 1 piece
1
12
Visit us at
800.444.1845 In Canada, visit
or call 800.561.3344.
TO BE USED WITH HOUSEHOLD REFRIGERATORS
2
3
or call
13
6
11
8
9
7
5
10
4
31-1000527 Rev. 1 09-20 GEA