Zepter EDELWASSER Manual De Instrucciones página 15

EN
Installation of outlet tubing (blue)
ATTENTION
Plumbing and carpentering work is needed
Ensure, whether the main water supply is turned off before any
plumbing work is started.
Following installation can be use in case when the customer prefer to
connect outlet tube for waste water to the drain under the sink.
1. Cut a square 16x25mm in the kitchen desk
(if is needed) and put the blue outlet tube trough.
2. Use the "drain clamp" for better outlet tube
fixing.
3. Drill the hole 6.5 – 7 mm in to drain pipe
4. Insert the blue tube in to upper part of the clamp (blue outlet tube should
be inserted inside of the drain pipe) and screw the clamp together