Indoor Installation - Rosewill RMS-DA3920A Manual De Instrucciones

Notice:
For the best reception, please check the following conditions.
1. Keep away from the source of interferences: keep away from heavy power consumption
devices, such as air conditioner, elevator, hair dryer and microwave oven...etc.
2. Avoid interruptions: In the case of digital terrestrial reception, if there are some Interruptions
between antenna and transmission tower, it will cause the signal loss temporary. So if the
antenna is installed as high as possible, the interruptions will be reduced.

Indoor installation

Step 1: Take out the RMS-DA3920A main unit.
Step 2: Take the standing unit and attach to the back of antenna.
Step 3: Take the coaxial cable, and connect it to TV (or Set-Top-Box, STB)
Step 4: Connect another end of the cable to the antenna (RMS-DA3920A).
Step 5: Take out the power adaptor; connect the barrel end to the DC input of antenna, AC end
to the AC Outlet. (Please note use only supplied power adaptor.)
Step 6: Turn on the TV (or both STB and TV).
Step 7: Adjust the orientation of antenna to get the best signal reception.
Step 8: Stretch out the rod antenna, if you need better VHF reception.
DC IN
INSTALLATION
Rod
Antenna
F female
Connector
Coaxial Cable
Standing unit
Power Adaptor
(DC 9V)
Digital TV or STB