Cleaning And Maintenance; Troubleshooting - 1byone BEAUTURAL Manual De Instrucciones

Cleaning and Maintenance

EN
NOTE:
DE
• Do NOT use abrasive cleaners or brushes to clean the water tank or the water
bowl.
FR
• Always turn off and unplug the appliance from the power supply before
ES
cleaning.
• We suggest cleaning the water tank and water bowl once a week to remove
IT
water scale, debris and mineral build-up.
• If the appliance is not to be used for a long time, it should be cleaned and
dried thoroughly before storing.
• Do not submerge the base in water or rinse it directly in the sink.
Cleaning the Water Tank
Cleaning the Water Bowl
Pour excess water out of the bowl. Wash it with
clean water using a cleaning brush or a soft cloth.
Do NOT rinse it directly in a sink or submerge it in
water.
NOTE:
• To avoid damaging the oscillator and the floater,
• Do NOT allow water to enter the air outlet and
1. Remove the mist nozzle from the
water tank. Invert the water tank and
turn the filter anti-clockwise. Remove
the filter from the water tank.
2. Clean the water tank with a diluted
vinegar solution.
3. Rinse it thoroughly. Please do not
leave any cleaning residue in the
water tank.
please clean them carefully using a soft brush
with clean water.
the DC jack when cleaning the water bowl.
8
Cleaning the Surface of the Appliance
Wipe the surface with a soft, damp cloth.
NOTE:
After cleaning the appliance, dry it thoroughly with a soft, clean cloth or paper
towel before its next use or before storing it.

Troubleshooting

Contact the manufacturer or the seller if an appliance issue cannot be resolved
using the troubleshooting tips below.
Problem Reason
The power adapter is
not connected to the
appliance or the power
supply.
The water tank is empty. Refill the water tank.
The appliance does
not work.
The water tank is
detached from the base.
The appliance is tilted.
The appliance does There is dust or mineral
not produce enough build-up on the
mist. oscillator.
The water in the
appliance is dirty, or the
water has been left in
The mist has a foul
the tank for too long.
smell.
The oscillator may be
dirty.
There's an abnormal
noise when the
The appliance is tilted.
appliance is
operating.
The water tank is not
installed properly.
The appliance is
leaking water.
The water filter
becomes loose.
Solution
Connect the power adapter to the
appliance and power supply.
Make sure the DC plug is fully
plugged into the appliance.
Install the water tank correctly.
Ensure that the logo on the water
tank is aligned with the rotary
knob on the base.
Place the appliance on a firm and
level surface.
Clean the oscillator as per
instructions.
Empty the appliance. Clean the
water tank and the water bowl.
Refill the water tank with purified
water.
Clean the oscillator as per
instructions.
Place the appliance on a firm and
level surface.
Install the water tank correctly.
Securely tighten the water filter
on the water tank.
9
EN
DE
FR
ES
IT