1. Manuales
  2. Marcas
  3. MōDRN Manuales
  4. Almacenamiento de Herramientas
  5. 8682E
  6. Instrucciones de ensamble

MōDRN 8682E Instrucciones De Ensamble

Ocultar thumbs
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Descargar este manual
ASSEMBLY INSTRUCTIONS
Model: #8682E
MōDRN Retro Glam Marion Sleigh Base End Table
Lot Number: _________________
Date of Purchase: ___ / ___ / ____
WARNING The maximum load capacity as listed above may not be exceeded and is assumed to be
!
distributed evenly.. Exceeding load capacity may result in collapse and possible injury.
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Thank you for your purchase. We want to make sure it is to your complete satisfaction. Hardware is separated individually for easy
identi cation. Please, identify and count all parts and hardware to make sure they match with the illustrations herein and are all
present.
If any parts are missing or defective please contact our customer service department.
Customer Service - 1-866-528-8364 / support@dimensionsfurniture.com
Your satisfaction is our top priority. Our products are designed and manufactured to meet the highest quality. In the event that
you have assembly questions, or parts are missing or damaged, please do not return the product.
Our customer service department would appreciate the opportunity to provide any help necessary regarding assembly and to
provide any necessary parts.
Manufactured by: Dimensions Furniture, Inc
341 Gradle Drive, Carmel, IN 46032
1-866-528-8364 / support@dimensionsfurniture.com
Maximum load
1/5

Publicidad

Tabla de contenido
loading

Manuales relacionados para MōDRN 8682E

Resumen de contenidos para MōDRN 8682E

  • Página 1 ASSEMBLY INSTRUCTIONS Manufactured by: Dimensions Furniture, Inc Model: #8682E 341 Gradle Drive, Carmel, IN 46032 MōDRN Retro Glam Marion Sleigh Base End Table 1-866-528-8364 / support@dimensionsfurniture.com Lot Number: _________________ Date of Purchase: ___ / ___ / ____ Maximum load WARNING The maximum load capacity as listed above may not be exceeded and is assumed to be distributed evenly..

  • Página 2: Pre-Assembly Preparation

    PRE-ASSEMBLY PREPARATION: CAUTION ! Please read below statements before beginning assembly.   Assembly should take place in the secure environment that is clean and dry.  Assembly can be done by one person, but two persons are recommended.  Allen wrench available for assembly.
  • Página 3 STEP-BY-STEP ASSEMBLY Step 1 - Attach each Leg Frame to the Table Body using eight Long Bolts Long Bolt (1/4”x1”) Dowel Allen Wrench...
  • Página 4 STEP-BY-STEP ASSEMBLY Step 2 - Attach both Central Legs to the assembly, as shown, using eight Short Bolts with Washers . Be sure to leave bolts loose until each bolt is inserted properly then go back and tighten. NOTE: Do not over tighten. Short Bolt with Washers (1/4”x5/8”)
  • Página 5 STEP-BY-STEP ASSEMBLY Step 3 - Assembly is now complete. LIMITED ONE YEAR WARRANTY Warranty available to original purchaser only. Proof of purchase is required. This warranty is your sole remedy for product defect and does not cover damage due to mishandling, misuse, or abuse. The manufacturer is not responsible for incidental or consequential damages.
  • Página 6 Printed in China...

  • Página 7: Instruciones De Ensamble

    INSTRUCIONES DE ENSAMBLE Manufacturado por: Dimensions Furniture, Inc Modelo: #8682E 341 Gradle Drive, Carmel, IN 46032 MōDRN Retro Glam Marion Sleigh Base End Table 1-866-528-8364 / support@dimensionsfurniture.com Numero de Lote: _________________ Fecha de Compra: ___ / ___ / ____ Carga Maxima ADVERTENCIA La capacidad de peso máximo como se menciona anteriormente no debe excederse...

  • Página 8: Preparacion De Pre-Ensamblaje

    PREPARACION DE PRE-ENSAMBLAJE: PRECAUCION ! Porfavor lea las instrucciones antes de comenzar el ensamblaje.   El ensamble deve realizarse en un entorno seguro y seco.  El ensamble lo puede hacer una sola persona pero se recomienda dos personas. ...

  • Página 9: Ensamble Paso Por Paso

    ENSAMBLE PASO POR PASO Paso 1 - Coloque el cuerpo de la mesa sobre una super cie plana como se muestra. Inserte dos tarugos de madera los lugares que se muestran en cada estructura de la pata . Adjunte cada marco de pata al cuerpo usando los ocho tornillos largos Acontinuacion rote el conjunto boca abajo y coloque la parte superior del cuepo sobre Una super cie plana.
  • Página 10 ENSAMBLE PASO POR PASO Paso 2 - Adjunte ambas partes centrales al conjunto como se mueestra usando los ocho Tornillos cortos con las arandelas asegurese de dejar los tornillos sueltos hasta Que cada tornillo se inserte correctamente, luego retroceda y apriete. NOTA: No apriete demasiado.
  • Página 11 ENSAMBLE PASO POR PASO Paso 3 - El ensamblado esta completo. Para subir o bajar la altura para eliminar el bamboleo, gire los pies ajustables hacia la BAJAR derecha para bajar y gire hacia la izquierda SUBIR para subir. LIMITE DE GARANTIA UN AÑO Garantia disponible solo para el comprador original, se requiere comprobante de compra.
  • Página 12 Impreso en China...

Tabla de contenido