Oxygenics PowerBlast Instrucciones Para La Instalación

P
OWER
EASY INSTALLATION
INSTRUCTIONS
STEP 1
Remove your existing
shower head. To
remove, turn the
existing shower head
in a counterclockwise
direction.
STEP 4
In a clockwise
direction, screw
handheld holder onto
the taped portion of
shower arm. Hand
tighten only.
ATTENTION:
WASHERS
PRE-INSTALLED
IN HOSE ENDS
Washers must be inserted
into both hose ends for
proper installation.
B
LAST
STEP 2
Remove any remnants
of old plumber's tape
and flush out shower
pipe for 5 to 10
seconds.
STEP 5
Attach end of hose to
handheld holder and
hand tighten.
EASY TWIST
SPRAY SELECTION
Enjoying multiple spray
patterns during your
shower has never been
easier. With the
PowerBlast's easy twist
design, simply rotate
the easy spray selector
for a quick spray change. e.
STEP 3
Wrap plumber's tape
clockwise 3 or 4 turns
around threaded end
of shower arm.
STEP 6
Attach end of hose to
base of handheld and
hand tighten. Insert
your new handheld
shower in holder.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty, our
Customer Service team can be contacted by:
PHONE:
1-866-440-9257
775-420-5600
or
LIVE CHAT:
www.oxygenics.com
EMAIL:
support@oxygenics.com
ONLINE:
www.oxygenics.com/claims
Business hours:
Monday - Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30pm PST*
*Closed on all nationally observed holidays
For use with automatic
compensating valves
rated at 1.35 GPM
(5.11 L/min) or less.