Descargar Imprimir esta página

Zee MIRTOON 10 m Modo De Empleo página 6

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
INSTALLATION
CAUTION: PLEASE READ THIS MANUAL
CAREFULLY BEFORE ASSEMBLY AND
USE. IMPROPER USE CAN DAMAGE
THE REEL AND THE HOSE AND COULD
RESULT IN INJURY. PLEASE SAVE THIS
MANUAL FOR FUTURE USE.
3
Untitled-1 6
Untitled-1 6
INTRODUCTION
The hose rewinds itself up automatically
onto the reel. The automatic lock in the
reel allows you to determine the length of
the hose.
INSTALLATION
01. Use the screw holes in the wall bracket to
mark the place on the wall where
the holes are to be drilled. The screws and
plugs that have been supplied are suitable
for use on standard stone, concrete or
wooden walls. For other surfaces, the
appropriate types of screws and plugs
should be obtained and used.
02. The screw holes should be drilled.
03. Insert the plugs.
04. Align the holes of the wall bracket over
the plugs and screw the bracket into
place. Note! Do not screw the screws in
too tightly; it could damage the plastic
part of the reel.
ENGLISH
x 4: 8mm/40mm
8/10/20 17:41
8/10/20 17:41

Publicidad

loading

Productos relacionados para Zee MIRTOON 10 m

Este manual también es adecuado para:

Mirtoon