Publicidad
Idiomas disponibles
Idiomas disponibles
Anbauanleitung
Schnellverschluss
Quick-release fastener
MediaBag
D
1. Cut the template (page 3) along the red line and place it over the back panel of the MediaBag (Figure B).
2. Now drill 4 holes (green) in the Media Bag, by using a 4mm driller. Pay attention to the correct fit of the template.
3. Please screw the mounting plate with the 4 rounded head screws
4. Now the base plate will be screwed together with the MultiPod by using the countersunk screws
5. Finally, the rubber pad is glued onto the base plate (Figure E).
News, Shop, Downloads + Informationen:
www.wunderlich.de
Kataloganforderung + Downloads:
www.wunderlich.de/Katalog
Wunderlich GmbH | Kranzweiher Weg 12 | 53489 Sinzig | Gewerbepark | Germany | Tel. +49-(0)2642-97980 | Fax +049-(o)2642-979833 | wunderlich@wunderlich.de
Geschäftsführer/Managing Directors: Erich Wunderlich | Amtsgericht Andernach | HRB 12314 | USTID-Nr./VAT-No. 01 DE 149 271 221
|
Fitting Instruction
|
Chiusura rapida
MediaBag
MediaBag
E
Catalogue download (English):
www.wunderlich.de/en
General information, dealers and news:
www.wunderlich.de/en
Istruzione
|
Instructions
|
COPYRIGHT BY WUNDERLICH
WWW.WUNDERLICH.DE
Fermeture rapide
MediaBag
(4x6 and 4x8)
in place to the MediaBag (Figure C).
Download catalogo (italiano):
www.wunderlich.de/en
Informazioni generali, dealer e Novità:
http://www.wunderlich.de/en
Instrucciones
Cierre rápido
MediaBag
F
4x8
(Figure D).
Télécharger les catalogues (francais):
www.wunderlich.de/en
Informations générales et distributeurs:
www.wunderlich.de/en
Universal
21021-00X
Descargar los catálogos (español):
www.wunderlich.de/en
Informaciones generales, tiendas y noticias:
www.wunderlich.de/en
2
Publicidad
