C - Configuration; Quick Start-Up; Pairing The Sensor To The Station; Time And Date Setting - THOMSON 513629 Manual Del Usuario

C - CONFIGURATION

1 - QUICK START-UP

These steps must be followed in order.
Insert 2 AAA LR03 batteries (not supplied) into the
station 16. Then insert the 2 AAA LR03 batteries (not
supplied) into the outdoor sensor, ensuring that the
polarity is respected 17.

PAIRING THE SENSOR TO THE STATION

Pairing is automatic once the batteries are inserted.
To force pairing, if required:
- On the station, press and hold the button for 5
seconds
DOWN, the indicator
- On the outdoor sensor, remove then reinsert the
batteries, positioning yourself near the weather
station

TIME AND DATE SETTING

- Press and hold the MODE button until the year
starts fl ashing.
- Set the year using the UP and DOWN buttons
- Press the MODE button to confi rm. The fi gure
under M fl ashes on the lower right side of the
screen, set the month using the UP and DOWN
buttons
- Press the MODE button to confi rm. The fi gure
under D fl ashes on the lower right side of the
screen, set the Day using the UP and DOWN
buttons
- Press the MODE button to confi rm. The letters M
and D fl ash on the lower right side of the screen.
Set the display order using the UP and DOWN
buttons (month/day or day/month)
- Press the MODE button to confi rm. The two
letters to the right of DAY fl ash. Set the calendar
language using the UP and DOWN buttons
(GE = German / EN = English / RU = Russian
/ FR= French / IS Italian / ES = Spanish / NE =
Netherlands / DA = Danish)
- Press the MODE button to confi rm. The two
fi gures under Time: 00 fl ashes. Set the time zone
using the UP and DOWN buttons
- Press the MODE button to confi rm. 24h or 12h
fl ashes. Set the time display format using the UP
and DOWN buttons
- Press the MODE button to confi rm then set the
hour using the UP and DOWN buttons.
- Press the MODE button to confi rm then set the
minutes using the UP and DOWN buttons.
8
EN
starts blinking
OUT
u . e i t y u r e c n s s o m o t h w . w w
.
WIRELESS WEATHER STATION
- Press the MODE button again to confi rm the
settings.

ALARM SETTING

- Press the Mode button once: the letters AL
appear on the hour side.
- Press and hold the Mode button for 3 seconds:
The hour fl ashes
- Set the hour of the alarm using the UP and
.
DOWN buttons
- Press the MODE button to confi rm. The minutes
fl ash.
- Set the minutes of the alarm using the UP and
DOWN buttons.
- Finish the confi guration by pressing quickly on the
MODE button
To set the alarm, press the UP button once. A bell
To set the alarm, press the
(4) appears between the hour and minutes
To turn off the alarm, press the UP button once. The
bell (4) disappears.

AUTOMATIC TIME SETTING

To launch the automatic time setting for the station, To launch the automatic time setting for the station,
press and hold the UP button until the
fl ashes (10). The station switches to radio reception
(for 7 minutes) and attempts to pick up the DCF77
time signal to automatically update the time and
date.
Note: the time zone must be set correctly for a
correct display. If reception is insuffi cient, please set
the station near a window.
Ensure that you leave a gap of 2.5 m between the
station and any source of interference (television,
router, microwaves, etc.)
The signal search can be cut off at any point by
pressing the UP button, if the signal is not available.
LED