C - Configuration; Quick Start-Up; Pairing The Sensor To The Station; Time And Date Setting - THOMSON 513630 Manual Del Usuario

C - CONFIGURATION

1 - QUICK START-UP

These steps must be followed in order.
Insert 2 AAA LR03 batteries (not supplied) into the
station 19. Then insert the 2 AAA LR03 batteries (not
supplied) into the outdoor sensor, ensuring that the
polarity is respected 21.

PAIRING THE SENSOR TO THE STATION

Pairing is automatic once the batteries are inserted.
To force pairing, if required:
- On the station, press and hold the DOWN button
for 5 seconds. The indicator
- On the outdoor sensor, remove then reinsert the
batteries, positioning yourself near the weather
station.

TIME AND DATE SETTING

- Press and hold the MODE button until the year
starts fl ashing. Using the UP and DOWN buttons,
set the year.
- Press the MODE button to confi rm. The fi gure to
the left of M fl ashes on the lower right side of the
screen. Set the month using the UP and DOWN
buttons
- Press the MODE button to confi rm. The fi gure to
the left of D fl ashes on the lower right side of
the screen. Set the Day using the UP and DOWN
buttons
- Press the MODE button to confi rm. The letters M
and D fl ash on the lower right side of the screen.
Set the display order using the UP and DOWN
buttons (month/day or day/month)
- Press the MODE button to confi rm. The two
letters to the right of DAY fl ash. Set the calendar
language using the UP and DOWN buttons (GE
= German / EN = English / FR= French / IS Italian
/ Sp = Spanish / DU = Netherlands / DA = Danish)
- Press the MODE button to confi rm. The two
fi gures under Time: 00 fl ash. Set the time zone
using the UP and DOWN buttons.
- Press the MODE button to confi rm. 24h or 12h
fl ashes. Set the display format for the hour using
the UP and DOWN buttons
- Press the MODE button to confi rm then
set the hour using the UP and DOWN buttons.
- Press the MODE button to confi rm then set the
minutes using the UP and DOWN buttons.
- Press the MODE button again
to confi rm the settings.
8
EN
starts to fl ash
u . e i t y u r e c n s s o m o t h w . w w
WIRELESS WEATHER STATION

ALARM SETTING

- Press and hold the ALARM button for 3 seconds:
The hour of the alarm fl ashes
Set the hour of the alarm using the UP and
DOWN buttons
- Press the ALARM button to confi rm. The minutes
fl ash. Set the minutes of the alarm using the
UP and DOWN buttons
- Press the ALARM button to confi rm. Zz 05
fl ashes.
Set the duration of the alarm postponement in
minutes using the UP and DOWN buttons
- Finish the confi guration by pressing quickly on the
ALARM button
- When the alarm goes off, pressing the Light/SNZ
button pauses the alarm and postpones it to the
pre-set time (Zz).
- When the alarm goes off, pressing the ALARM
button stops the alarm tone.
To set the alarm, press the ALARM button once. A
bell (9) appears between the hour and minutes
To turn off the alarm, press the ALARM button once.
The bell (9) disappears.
The tone lasts for approximately 1 minute.

AUTOMATIC TIME SETTING

To launch the automatic time setting for the station,
press the WAVE button once. The
The station switches to radio reception (for 7 minutes)
and attempts to pick up the DCF77 time signal to
automatically update the time and date.
Note: the time zone must be set correctly for a
correct display. If reception is insuffi cient, please set
the station near a window.
Ensure that you leave a gap of 2.5 m between the
station and any source of interference (television,
router, microwaves, etc.)
The signal search can be cut off at any point
by pressing the WAVE button, if the signal is not
available.
LED (8) fl ashes.