Publicidad
Enlaces rápidos
Installation Guide
Sight glass
LLG
1
3
Segment with 20 screws
4
© Danfoss A/S (MWA), 2015-02
2
Segment with 12 screws
DKRCI.PI.GG0.A2.ML / 520H8306
A
B
and
Nm
LLG
44
A
Note!
Bolts for flanges are not tightened from
factory. The bolts must be tightened
on site.
LB-feet
32
1
Publicidad
Resumen de contenidos para Grundfos LLG 185-1550
- Página 1 Installation Guide Sight glass Segment with 12 screws Segment with 20 screws LB-feet Note! Bolts for flanges are not tightened from factory. The bolts must be tightened on site. © Danfoss A/S (MWA), 2015-02 DKRCI.PI.GG0.A2.ML / 520H8306...
- Página 2 Installation Maintenance Point 2 Replacement of packing Install LLG 185-1550 on a bracket using the Use a torque wrench to tighten the screws 4 screws delivered together with the glass. Loosen all the screws of the LLG by ¼ of to 15 Nm (11 ft lb).
- Página 3 Montar el LLG 185-1550 sobre una placa Punto 1 soporte utilizando los 4 tornillos que se Mantenimiento Con la mano hasta que el tornillo entre en entregan junto con el indicador de nivel contacto con la pieza frontal.
- Página 4 DKRCI.PI.GG0.A2.ML / 520H8306 © Danfoss A/S (MWA), 2015-02...