Maintenance / Service; Caracteristiques Techniques - Skil 3153 Manual Original

HIGH VOLUME FUNCTION
• Inflating
- connect the high volume air hose P
to the air outlet r
- connect the other end of the hose
to the item to be inflated directly or
with the adapter R
! make sure that the high volume
function is selected e b
- to start inflating, press button D
- to pause or stop inflating, press
button D again
! the tool does not stop
automatically when high volume
function is chosen
! allow the tool to cool down for 5
minutes after each 15 minutes of
continuous use
• Deflating
- for deflating, follow the instruction
above, but connect the high volume
air hose to the air intake t

MAINTENANCE / SERVICE

• This tool is not intended for
professional use
• Clean the tool with a dry, soft cloth (do
not use cleaning agents or solvents)
! remove battery from tool before
cleaning
• If the tool should fail despite the care
taken in manufacturing and testing
procedures, repair should be carried
out by an after-sales service centre for
SKIL power tools
- send the tool undismantled
together with proof of purchase to
your dealer or the nearest SKIL
service station (addresses as well
as the service diagram of the tool
are listed on www.skil.com)
• Be aware that damage due to overload
or improper handling of the tool will
be excluded from the warranty (for
the SKIL warranty conditions see
www.skil.com or ask your dealer)
ENVIRONMENT
• Do not dispose of electric
tools, batteries, accessories
and packaging together with
household waste material (only for
EU countries)
- in observance of European Directive
2012/19/EC on waste of electric
and electronic equipment and its
implementation in accordance with
national law, electric tools that have
reached the end of their life must be
collected separately and returned
to an environmentally compatible
recycling facility
- symbol 7 will remind you of this
when the need for disposing occurs
! prior to disposal protect battery
terminals with heavy tape to
prevent short-circuit
b
Gonfleur sans fil à double
fonction
INTRODUCTION
• Cet outil est destiné à gonfler pneus,
ballons et autres objets de petit
volume adaptables sur l'embout de
gonflage directement ou en utilisant
un des adaptateurs fournis.
• Il n'est pas conçu pour gonfler des
objets de grand volume tels que
matelas gonflables, piscines, bateaux
etc.
• Cet outil n'est pas conçu pour un
usage professionnel
• Lisez attentivement ce manuel
d'instruction avant d'utiliser l'outil
et conservez-le pour pouvoir vous
y référer ultérieurement 3
CARACTERISTIQUES
TECHNIQUES 1
ELEMENTS DE L'OUTIL 2
A Boutons +/-
B Poignée de transport
C Écran à cristaux liquides
D Bouton démarrage/pause
E Bouton de fonction
F Bouton marche/arrêt
G Bouton LED
H Tuyau d'air haute pression
J Rangement des adaptateurs
K Voyant LED
L Adaptateur Presta
M Adaptateur sport
8
3153