Descargar Imprimir esta página
Matco Tools PCFLASH Manual De Instrucciones

Matco Tools PCFLASH Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

WARNING
Study, understand and follow all instructions provided
with this product. Read these instructions carefully
before installing, operating, servicing or repairing this
tool. Keep these instructions in a safe, accessible
place.
INTENDED USE OF THE TOOL
The PCFLASH is designed to be used as a rechargeable
flashlight. Do not use this tool outside of the designed
intent. Never modify the tool for any other purpose or
use.
WARNING
Caution: To help prevent personal injury
• Use of this product can expose you to chemicals such
as phthalates which are known to the State of
California to cause cancer, and birth defects or other
reproductive harm. For more information go to
www.P65Warnings.ca.gov/product.
Always wear ANSI approved safety equipment, safety
glasses and clothing when using this product. Study,
understand, and follow all instructions provided with
this product. Failure to read and follow all warnings
and operating instructions may result in damages and
serious injury or death.
• Always wear ANSI approved goggles when using this
product. (Users and bystanders).
• Never use this tool for any application other than for
which it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with
accessories not designed for it could result in serious
injury or death.
• Always select the correct accessories of the correct
size and design for the job that you are attempting to
perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
• Do not begin repairs without assurance that vehicle is
in a secure position, and will not move during repair.
BEFORE USE
When unpacking, check the parts diagram and part
number listing on page 2 to make sure all parts are
included. If any parts are missing or damaged, please
call your distributor.
PRO-CHARGE
WIRELESS FLASHLIGHT
The manufacturer warrants this product to the original
user against defective material or workmanship for a
period of 1 year from the date of purchase.
The manufacturer reserves the right to determine
whether the part or parts failed because of defective
material, workmanship or other causes. Failures caused
by accident, alteration, or misuse are not covered by
this warranty.
The manufacturer, at its discretion, will repair or replace
product covered under this warranty, free of charge.
Repairs or replacements of products covered under this
warranty are warranted for the remainder of the original
warranty period.
The manufacturer or its authorized service representatives
must perform all warranty repairs. Any repair to the
product by unauthorized service representatives voids
this warranty. The rights under this warranty are limited
to the original user and may not be transferred to
subsequent owners.
The warranty is in lieu of all other warranties, expressed
or implied, including warranties of merchantability and
fitness for a particular purpose. Some states do not allow
the exclusion or limitations of incidental or consequential
damages, so the above limitations may not apply to you.
PRODUCT INFORMATION:
Powerful Lighting. Up to 1,100 lumens of light output.
Easy On/Off. Rear on/off switch plus side mounted
power level button with 3 light settings.
Wireless Charging. Matco's exclusive wireless
charging ready, or use any USB-C. (not included)
DO NOT DISCARD – GIVE TO USER
Page 1
1 YEAR LIMITED WARRANTY
PCFLASH
Made in China
to Matco specifications
2103080-14

Publicidad

loading

Resumen de contenidos para Matco Tools PCFLASH

  • Página 1 Keep these instructions in a safe, accessible place. INTENDED USE OF THE TOOL The PCFLASH is designed to be used as a rechargeable Made in China flashlight. Do not use this tool outside of the designed to Matco specifications intent.
  • Página 2 PRO-CHARGE PCFLASH WIRELESS FLASHLIGHT SPECIFICATION Light Type: Rechargeable SMD Light Dimensions: 41 x 159mm Weight of Light: 0.47 lbs. (215g) Cordless/Corded: Cordless Charge Port Type, Micro USB: TYPE C On/Off, High/Low Switch Type: Low-Mid-High Charger rating/type: USB 5V1A or Wireless Charging Station (10W)
  • Página 3 Hecho en China EL USO DE LA HERRAMIETA Para Matco especificaciones El PCFLASH está diseñado para usarse como una linterna recargable. No utilice esta herramienta fuera de GARANTÍA LIMITADA DE UN AÑO la intención de su diseño. Nunca modifique la El fabricante garantiza este producto al usuario original herramienta para ningún otro propósito o uso.
  • Página 4: Especificación

    PRO-CHARGE PCFLASH LINTERNA INALÁMBRICA ESPECIFICACIÓN Tipo de luz: SMD recargable Dimensiones de luz: 41 x 159mm Peso de la luz: 0.47 libras. (215g) Inalámbrico/Con cable: Inalámbrico Tipo de puerto de carga, Micro USB: TIPO C Tipo de interruptor de encendido/apagado, alto/bajo: Bajo-Medio-Alto Clasificación/tipo de cargador:...
  • Página 5: Pro-Charge Lampe De Poche Sans Fil

    UTILISATION PRÉVUE DE L’OUTIL Fabriqué à Chine les spécifications de Matco Le PCFLASH est conçu pour être utilisé comme une lampe de poche rechargeable. N'utilisez pas cet outil en 1 ANNÉE DE GARANTIE LIMITÉE dehors de l'intention prévue. Ne jamais modifier l'outil à...
  • Página 6 PRO-CHARGE LAMPE PCFLASH DE POCHE SANS FIL SPÉCIFICATION Type de lumière: SMD Rechargeable Dimensions de la lumière: 41 x 159mm Poids de la lumière: 0.47 lb (215g) Sans fil/filaire: Sans Fil Type de port de charge, micro USB: TYPE C Type de commutateur marche/arrêt, haut/bas:...