ISEO AP102 Folleto De Instrucciones página 3

ISEO Serrature S.p.a.
Via S. Girolamo 13
25055 Pisogne (BS)
Italy
Before making the connection, adjust the maximum force of the gate through the mechanical clutch of the actuator. The force
must not exceed 15 Kg. ( UNI 8612 standard).
Remove the bridge inserted on the connector (see control equipment figure) and insert the connector of the anti-crushing
board.
Adjust the multi-revolution (20 revolutions) "TR" trimmer so as to obtain the maximum force desired.
N.B. All of the force adjustment operations and the connection of the electrical cables must be
performed with the voltage to the device disconnected.
Phone: 0364/8821
Fax: 0364/86175
Fax Sales Dept.: 0364/86861
Made in Italy
INSTRUCTION BOOK FOR THE
ANTI-CRUSHING SENSOR AAP102
to be moved depending on the actuator RMP
1400 r.p.m.
750 r.p.m.
TR
magnetic sensor
I EO
GATE FORCE ADJUSTMENT.
Through a multi-revolution trimmer (20 rotations to
perform the entire travel distance), it is possible to
adjust the maximum force of the gate, with extreme
precision.
When rotated clockwise the force is increased.
MAGNET LOCK NUT
MAGNET
ELECTRONIC BOARD
PLASTIC SUPPORT
S
AIC085F / 01-98