Safety Information - LF UTILITECH C351 Instrucciones De Montaje

HARDWARE CONTENTS (shown actual size)
AA
Lamp Clip
Qty. 6

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install
the product.
WARNING
• Read all safety precautions and installation instructions carefully before installing or servicing
this fixture. Failure to comply with these instructions could result in potentially fatal electrical
shock and/or property damage.
• It is recommended that a qualified electrician perform all wiring. This fixture must be wired in
accordance with all national and local electrical codes.
• To reduce the risk of electrical shock and to assure proper operation, this fixture must be
adequately grounded.
CAUTION
• Do not handle any energized fixture or attempt to energize any fixture with wet hands or while
standing on a wet or damp surface or in water.
• Disconnect electrical power before installing or servicing any part of this fixture.
• Do not use with dimmer switch of any kind.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble, install or operate the product.
Estimated Assembly Time: 45 minutes
Tools required for assembly (not included): Eye protection, screwdriver, ladder, electrical tape
Helpful tools (not included): Wire cutter, pliers, stud finder, wire stripper, drill with 1/4 inch bit
BB
#6-32 x 3/8 in.
Screw
Qty. 6
CC DD
Hex nut
Wire nut
Qty. 6
Qty. 3
3
EE
#8-32 x 7/8 in.
Screw
Qty. 2
Lowes.com